15
3.9 Suspension
This option is used to temporarily suspend the irrigation controller’s control of the
valves, for example, while it is raining. The irrigation schedule remains stored in
the controller, but is not implemented. The suspension option disables ALL valves
connected to the irrigation controller.
1. Press
until the
appears.
2. Press and hold down
for 5 seconds.
appears blinking alongside the word “rain off”.
The controller is now suspended.
3. To restore control to the controller,
press
until the
appears, and then press
and hold down
until the
disappears.
4. Suspension can also be implemented while a
valve has been activated.
5. If an attempt is made to operate a valve
manually while the irrigation controller has
been suspended, or when a valve is meant to
open sequentially, the word “rAin”
appears on the display, and the valve will not open.
3.10 Irrigation Duration Extended or Shortened by a Speci
fi
ed
Percentage
You can extend / shorten the irrigation duration for all the valves simultaneously by
specifying
a percentage for the duration.
Example: if the irrigation duration has been set
to one hour, adding 10% extends the duration
by 6 minutes (to 66 minutes).
1. Press
until the
appears.
2. Wait until no digit is blinking
3. Press
and
simultaneously. 00+% is
displayed.
4. Press
. The 00 blinks. Press
or
to
increase or decrease the percentage as
necessary (in increments of 5%). +% or -% is
permanently displayed on the main
display,
accordingly.
Important! The percentage cannot be changed for an individual
valve.
Summary of Contents for DC-11SF
Page 22: ...22 0 2 0 0 0 0 0 0 0 4 2 0 5 5 1 2 3 4 5 6...
Page 23: ...23 0 4 4 4 7 8 9 10 11 12 13...
Page 24: ...GDB162...
