![background image](http://html1.mh-extra.com/html/galaxy/digital-hd-satellite-receiver/digital-hd-satellite-receiver_user-manual_3255052021.webp)
21
5.3 Upgrade By RS232 (Receiver to Receiver)
• Connect Null Modem RS 232 Cable (Pin #2 & #3
twisted) between master and slave receiver.
• Hook up the master receiver to the TV and select
transfer mode.
• Turn on the slave receiver power.
• Move highlight to “Start” on master receiver and press
[OK] key to start upgrade.
• Press [Exit] key to save the parameters and draw back
Warning!
Do not disturb data transfer by touching any Remote button, RS232 Cable, IF Cable, RCA Cable etc. during
data transfer period until “Please wait for saving” message disappeared
.
5.4 Upgrade By USB
• Download - USB Mode has following options:
Miancode, Bootlogo, All Code, All Data + Boot_code,
Background, Bootloader, Userdata and Upload(All Data
Backup).
• User need put the upgrade file with under root of USB
storage. When users switch to the Download - USB
mode, “File” will show the corresponding file
• Select the mode and download file, then you can start
download by USB.
5.5 Remove USB safely
You can remove USB devide without damage.
5.6 Smart Card
It will show up type and condition of the inserted Smart card.
5.6 Network Local setting
• DHCP : You can select DHCP (On or Off) in accordance
with User Network circumstances.
• In case of DHCP Off, you can fix IP Address, Subnet
Mask , Gateway, DNS Preferred and DNS Alternate in
accordance with User Network circumstances.