11
1) DiSEqC 1.2 – Motor Setting
If you select “DiSEqC1.2”, “Local Longitude / Local Latitude” is not available.
• Press
◀
▶
key or [OK] key to change satellite or transponder.
• Position No.& Save: You can press
◀
▶
key or number key to select or input Position NO.
• Go to X: Press [OK] key to open a list. You can go to X or go to reference.
• After select “Satellite” and “Position No & Save”, you can move the highlight to “West/Save/East” line and press
◀
▶
key
to move the dish and press [OK] to save the position.
• Move the highlight to “Recalculation” and press [OK] key to recalculate.
2) USALS
Set the satellite’s longitude and local longitude / local latitude, USALS can move dish automatically.
• Local Longitude
Please input Local Longitude by numeric
keys and adjust E.W by using
◀ ▶
keys
• Local Latitude
Please input Local Longitude by numeric
keys and adjust S.N. by using
◀ ▶
keys
• Motor Setting
Switching the satellite can move the dish
to the right place
• Limit Setup
When you set “limit setup” to “West Limit/ East Limit”, you can move the dish to west or east by pressing
◀
▶
key
manually. When you are moving to the target place, please press [OK] key to save the point.