4.5. Phone Remote Control
4.5.1.Preparations
4.5.2.Client Use
5.Abnormal phenomenon and ruled out
2
）
Start Sever Side Application
The default is on for the application when
startingthe receiver, user can set the
information in Remote Service. As P4-5-3.
Phone remote control is to use your android
mobile phone to control the receiver, and
your android mobile can be used as remote
control, keyboard, mouse and gravity censor
or use it to change channels.
1
）
Install the phone remote control application
and install on your mobile phone, you can
download from below link: http://www.
sdmctech.com/PhoneClient1.4.3.1.apk The
icon 4-5-2
：
3
）
Network Environment
Before using this software, need to make
sure that the receiver and the android mobile
phone is connected to the same WIFI hotspot.
After install the client Side software on your
mobile phone, you can start to connect your
phone to the receiver.
1
）
Connection
Turning on the WIFI of your phone, can click
scan to show the devices nearby as below
picture shows.
Select the correct IP address and type in the
password to connect to the receiver.
2
）
Guide Menu
After connecting successfully, will enter
below menu.
The user can select the functions to use.
19
18
P 4-5-1
P 4-5-2
P 4-5-3
P 4-5-4
Fault Phenomenon
Possible reason
Solution
After start, without
any display
The power cord didn't connect
or socket without electricity
Connected power plug, ensure normal
voltage electrical outlet
No Voice and
Images
Play box in standby mode
Please press the POWER button of the RCU
switch to the operation condition
Channel selection,
showing no signal
Wrong signal connection
Please re-connect signal refer to the system
connection
Television station has no signal Please try later when having signal
TV with Voice
without Images
Video line goes off
Please re-connect the video cables
TV images without
Voice
Audio wire has no connection
Re-connect the Audio lines
Play Box in quiet state
Please press mute button to restore volume
Audio setting is abnormal
Please enter the audio and video Settings
menu, select the appropriate sound channel
and language
Volume , down to minimum
Up the volume
Consistent Voice
with content
Inconsistent Track
Please setting in the audio and video
Settings menu, select sound channel
Images pause Or
Mosaic
phenomenon
The network speed not enough
or unstable
Contact to network operator
Controller failure
RCU not aimed the receiving
head of the front penal
Please aim at the front's ' SENSOR', then try
again
Shortage power of Remote
control batteries
Please change the batteries
Remote control is possibly
damaged
Please send it to the local maintenance
station for checking
P 4-5-5
Summary of Contents for Gi FLY T2
Page 1: ...GI FLY T2 HD DVB T2 DIGITAL MULTIMEDIA STB...
Page 11: ...GI FLY T2 HDTV...
