take the diodę
To assemble,
one end of the diodę to one feet of the capacitor's connect piece.
2. Fix the diodę with one screw (pay attention to the polarity of the diodę, refer to FIG.4
4.9 THE TURNTABLE
do as the
stops of III of
To disassemble,
1. Turn the microwave oven over (FIG.
2. Take off the
screws
fix the middle base board with a
- screwdriver and take off the middle cover (FIG.4
3. Loosen out the two screws of turntable motor with a
screwdriver, take out the turntable motor and
out the two
wires (4 -17).
Assembling steps:
1. Put the motor
into its connecting
and fix the motor
with two screws (FIG.4
2.
in the two wires.
3. Assemble and fix the middle base board with two screws
4. Turn the oven back.
5. As the FIG.4 - 19 shown, fix in the turntable shaft
the place in the roller ring and the
tray as FIG .4 - 20.
Fig. 4-18
turntable shaft supporter
roller ring
Fig. 4-19
© ©
o ©
&
4.10 THE DOOR
Firstly, do as the same with 1, 3, steps of III of this part.
Steps for dismantling:
out the terminal
of the interlock switch and the pilot switch.
(2) Loosen out the two screws which fixed the switch holder with a
and take the switch
off.
(3) Take off the interlock switch and the pilot switch
the holder.
(4) Take off the switch connecting lever
and the working lever from the holder.
Assembling steps:
14
