5. Take
the fan from the fan motor
as FIG.4 -14, then the fan
to
the fan motor,
1. Assemble the fan motor as FIG.4 - 14. Drip the
on
the
place of the fan motor shaft, and ix the fan on the
it
be fixed to the bottom of the
shaft. Attention: The fan motor shaft should not be
the fan should have no abnormal stick up.
assembled,
check whether the running fan
knock the fan holder.
2. Assemble the fan holder as FIG.4 - 13, Then connect the
power supply cord with the
wires of the fan
and
tighten the screws as FIG.4 -
and FIG.4 - 12.
s c r e w
earthing screw
Fig. 4-12
fan motor
Fig. 4-14
Fig. 4-13
Firstly, do as the
steps of III of this
To disassemble,
the wires of the capacitor out
2. Loosen and take out the screw which fix the capacitor
with a
-
and take out the clip and the
capacitor. (4-15).
To assemble,
1. Place the capacitor the capacitor clip with the end which
have three foot near the diodę
2.
one end of the clip in the fan holder trough
3. Tighten the screw, which fix the capacitor clip.
4.
in
the
of the capacitor.
fan holder
Fig. 4-15
4.8 THE DIODĘ.
do as the 2, 3, steps of III of this part.
To disassemble,
1.
out the diodę
which plugged in the
capacitor.
2. Loosen the
which fixed the diodę, and
magnetron
transformer
Fig. 4-16
