GALA CUT 350 K G.E.
Pág. 15
3.2 OPERATION SEQUENCE TO START UP THE EQUIPMENT
1.
Select and fit the type of accessories depending on the work to carry out. (See section 3.3).
2.
Connection power supply plug to the mains.
3.
Connect ground to the part to be cut
4.
Connect the equipment and regulate the desired welding current with potentiometer "2” Figure 2.
5.
You can now begin the cutting operation. (See section 3.4).
3.3 SELECTING AND FITTING ACCESSORIES.
Nozzle
Ø
= 0.9 (40 A)
Long Nozzle
Ø
= 0.9 (40 A)
PART THICKNESS AND SHAPE
UP TO 15 mm
Corners and difficult accesses
WEAR
LOW LOW
CUTTING SPEED
HIGH NORMAL
SEPARATION TO PART
CONTACT CONTACT
STEEL
12 mm
5 mm
2.5 mm
ALUMINIUM
10 mm
5 mm
3 mm
STAINLESS
8 mm
2.5 mm
1 mm
0,20 m/min
m/mín
2.5 m/min
THICK- CUT SPEED
1.0 m/min
