The installation must have been carried out by a qualified technical service. Please follow the
suggestions included in both the Installation Manual and the Assembly Instructions, which are enclosed
with the bathtub.
The bathtub should be connected to 230 V and the household's installation must have a 30 mA differential
switch and an appropriate magnetothermal switch suited to the model.
The metal elements of the bathtub must be connected equipotentially in accordance with the regulations
applying in each country.
Before a hydromassage.
•
In order for the bath water to circulate through the hydromassage circuit, ensure that the uppermost jets
are covered with water.
•
Special hydromassage essences or soaps must be used. Otherwise a great quantity of foam may be
generated.
Process.
•
Fill the bathtub with water until the uppermost jet is covered. Select the water temperature according to
your preference and the type of hydromassage bathtub to be taken.
•
Get into the water and press the start button (Fig.1). The desired hydromassage type can be selected
with the diverter ( fig 2)
•
The proportion of air, together with the water temperature, the duration of the bathtub and the use of oils,
essences or salts, will determine the effect of the hydromassage.
In general, it is recommended that the water stream should not be pointed directly at the body at an angle,
in order to obtain the greatest benefits of the massage.
Hydromassage Baths with start electronic pushbutton
OPERATION
SAFETY
SIDE HIDROMASAJE JETS
The jets can be directed at will, simply by pressing the
centre with your fingertip. Its ball-and-socket joint housing
allows the jet to be directed by finger pressure (Fig.5).
Additionally, the intensity of the water massage can be
regulated by turning the jet outlet. (Fig.6).
BOTTOM HIDROMASAJE JET
They inject water through the
multiple outlets on the bottom of
the bathtub ( Fig.4).
Fig.4
