In addition to the UNGUATOR® Coupling, required for transferring from a 300 ml or 500 ml
UNGUATOR ® Jar into a smaller UNGUATOR® Jar, both the UNGUATOR® spindle and the
AirDynamic® Pumpball System may also be used. Dispensing and transferring a formulation
via the regular UNGUATOR® Jar nozzle from a 1000ml UNGUATOR® Jar is practically only
possible using the AirDynamic® Pumpball System.
We recommend transferring the formulation after mixing as soon as possible, since the for-
mulation is still warm and less viscous.
5.2.7 AirDynamic® Pumball System
The AirDynamic® Pumball System optimizes batch
preparation within the closed system:
• Contamination-free transfer
• Contamination-free storage
The AirDynamic® Pumball System has been designed to
apply with UNGUATOR® Jars from size 300ml to 1000ml
to extract mixtures. An adapter connected to a pumpball
is affixed to the center hole on the body’s bottom of the
UNGUATOR® Jar with an air-tight connection.
By pumping air into the lower chamber of the UNGUATOR® Jar using the pumball, the
pressure thus generated moves the bottom upward. Thanks to the AirDynamic® Pumball
System, even thick pastes can be dispensed via the small dispensing opening in the screw
cap or transferred to small UNGUATOR® Jars using the UNGUATOR® Coupling. The material
outlet velocity depends on viscosity which may be reduced through heating.
The air pressure that had developed in the lower chamber of the UNGUATOR® Jar can be
relieved by opening the valve screw. This is mandatory after the transfer process using the
UNGUATOR® Coupling
before the smaller UNGUATOR® Jar is removed.
Otherwise this may
result in considerable contamination of the immediate environment, depending on the
formulation viscosity.
6.
General guidelines for the UNGUATOR® Technology
6.1 Preparing the UNGUATOR® Mixing System
The UNGUATOR® Mixing System consists of an UNGUATOR® Jar, an UNGUATOR® MB and
the components of the formulation to be mixed.
Pic. 24: UNGUATOR® AirDynamic®
Pumpballsystem
16
