Gainwise SS91BV-M, Manual

Page: 17 / 22

SS91BV-M GSM Intercom
17
Revision E8
,Jan 2015
To gain access to the different modes and control relay (by dial in)
No. Function command Description Default
1 Enter Programming Mode *12* [ password ] # Programming by calling 1234
2 Enter Monitoring Mode *13* [ password ] # To hear the surroundings where
the intercom installed
1212
3 Enter Access control
Mode (Trigger relay)
*33* [ password ] # Password mode access option 5678
4
Hold Relay *34* [ password ] # To hold relay to keep door
opened
5678
5
Release Relay *35* [ password ] # To release relay for door close 5678
User commands to check system info & control relay via SMS
No. Function Command Reply
1 check signal strength *20#
Signal Level 0~31 from poor to best
Service provide name, network
2 Check stored numbers *21# O [ number]…,I [ number]…..E (N)
O
：
call button numbers list
I
：
dial in to open numbers list
E
：
End
N
：
Next SMS
3
Check relay status *22# Relay [ status],Detect [ status ]
Status: ON / OFF
4 Trigger relay *33* [ password ] # No reply (default password:5678)
(Latch on when relay is on hold status)
5 Hold relay *34* [ password ] # No reply
(default password:5678)
6 Release relay *35* [ password ] # No reply
(default password:5678)
●
SMS data error
(Only 0~9
、
*
、
# are available)
SMS Data Error
●
Function code error Function Code Error