SS91BV-M GSM Intercom
8
Revision E8
,Jan 2015
SS91BV-M GSM INTERCOM OPERATION
When the visitor pushes the call button to activate the SS91BV-M ring tone will be heard from the GSM
intercom. At the same time connection is established with the phone number that is stored in the
SS91BV-M. If the first number is busy or not answered the call can be diverted to the second and the
third.. The remote phone answers the call from SS91BV-M and starts conversation with the visitors.
During conversation press * on your mobile for door open. The relay switches can also be temporarily
or permanently switched on or off by press # and 1.
Enter system menu
There are three different modes under system menu.
1.
Listener monitoring mode
2.
Access control mode
3.
Programming mode
To gain access to the system menu via dial in, follows these steps:
1.
Call the telephone number of the GSM intercom
2.
Wait for the intercom to answer and signal by one beep to enter system menu
3.
Enter the password of the mode you would like to enter
4.
Password correct one beep, password error 3 beeps.
5.
3 times failure attempt on password , hang up the call
