GAI-Tronics 013-02-0096-001 Installation Instructions Manual Download Page 8

Pub. 42004-556A 

IP Controller 

Page 7 of 8

 

P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-556A.docx 

01/21 

Operation

 

The IP controller front panel contains three status LEDs. 

The IP controller requires an 

Elemec3

 console database version 3.3.3 or later.  Upgrade older database 

versions using the E3 Console application.  Refer to the E3 Console manual for additional details (see the 
Reference Documentation section). 

The LEDs operate according to the following table: 

Table 1.  Front Panel LED Indicators 

LED 

Indication 

PA

 

IN

 

USE 

Green

—Indicates the PA system is in use. 

Off—Not in use 

SYSTEM

 

STATUS

 

Green

—Normal operation 

Red—Fault condition—Utilize the 

Elemec3 

Portal application 

for detailed status information. 

Blinking Red—Fault acknowledged 

Amber—Non-critical fault 

PWR

 

Blue

—Power is on. 

Off—No power 

 

The IP controller displays system status via the E3 Portal application over an IP network.  Loss of 
connection to the data network constitutes a fault condition indicated by the 

SYSTEM

 

STATUS

 LED on 

the front of the controller. 

Reference Documentation

 

GAI-Tronics’ product documentation is located on the GAI-Tronics website at 

https://www.gai-

tronics.com

. 

Document Title 

Publication No. 

Elemec3 Console Manual—Version 3.0 ........................................................................................ 42004-550 

Elemec3 Portal System-Administration Utility—Version 3.1 ....................................................... 42004-485 

Specifications

 

Electrical 

PoE: 

PoE, IEEE 802.23af Class 0  ....................................................................... 4.3 W/15.4 W (idle / maximum) 

PoE Plus, IEEE 802.3at Class 4 .................................................................... 4.3W/25.5 W (idle / maximum) 

Ethernet 

Ethernet ................................................................................................................................ 100/1000 Base-T 

Speed ...................................................................................................................................... 100/1000 Mbps 

Cable ............................................................................................................................. Category 5e or better 

Summary of Contents for 013-02-0096-001











Reviews: