Pub. 42004-556A
IP Controller
Page 4 of 8
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-556A.docx
01/21
Figure 4. IP Controller—Internal Component—Top View
Location
Set the IP controller on a desk or shelf or mount it in a 19-inch rack using GTC Kit No. 12625-001
(
purchased separately
).
Desktop
Install the four stabilizing feet and set the unit on a stable level surface.
Rackmount
Use GTC Kit No. 12625-001 to mount the IP controller in an standard EIA 19-inch rack (see Figure 5).
The controller is 1.75 inches tall/1 U of rack height.
1.
Install the support bracket to the IP controller using four M4 flat head screws (included with the kit).
2.
Install the blank bracket to the opposite side of the IP controller using four M4 flat head screws
(included with the kit).
3.
Mount the IP controller, in the desired location, in the rack, using four (
customer supplied
) screws.
