Gaggia SUP 049, Service Manual

Page: 27 / 45

GAGGIA CADORNA 04 TEST MODE & STEAM OUT
4/5
This page allow to test the functionality of grinder:
Info:
• p/s: indicate the current number of water flow expressed in pulses/sec. When is activated the pump and one
electrovalve the value measured must be equal to or greater than 10 p/s.
• Tank: Becomes active when the water into tank reach sensor level
• Frequency: indicate the frequency of mains voltage supply
• Boiler Temperature: indicate the boiler temperature in °C
The meaning of the sectors are the following:
Command:
• A (my favorite bottom): Selected Coffee Strength. If pressed change the current coffee strength from A1 to
A5
- A1: Very Mild
- A2: Mild
- A3: Regular
- A4: Strong
- A5: Very strong
• GTest (Home bottom): Activate/Deactivate the grinder for a time corresponding to the selected coffee
strength.
Info:
• Time during grinding: indicate the time while the machine is grinding in msec
• Z-cr: Colored box indicate that the measure of zero crossing is FAIL.
• 230V: indicate the voltage power supply detected from PWR board.
Page 5: Grinder
CADORNA TEST MODE
user guide
nomeFile
Cadorna - Test mode
v0.0_ENG.doc
1.0 F.Bolognesi 04/06/2019 Page | 6
revNum Redatto SaveDate Pagina/pagine
2.5 Grinder
This page allow to test the functionality of grinder:
Previous page Next page
Exit
The meaning of the sectors are the following:
Command:
• A (my favorite bottom): Selected Coffee Strength. If pressed change the current coffee strength from
A1 to A5
- A1: Very Mild
- A2: Mild
- A3: Regular
- A4: Strong
- A5: Very strong
•
GTest (On/off bottom): Activate/Deactivate the grinder for a time corresponding to the selected coffee
strength.
Info:
• Time during grinding: indicate the time while the machine is grinding in msec
• Z-cr: Colored box indicate that the measure of zero crossing is FAIL.
• 230V: indicate the voltage power supply detected from PWR board.