Gaggia SUP 049, Service Manual

Page: 26 / 45

GAGGIA CADORNA 04 TEST MODE & STEAM OUT
3/5
This page allow to test the functionality of Brew Unit and the microswitchs:
This page allow to test the functionality of hydraulic circuit:
The meaning of the sectors are the following:
• Work (my favorite bottom): when pressed move the brew unit to WORK
• Home (home bottom): when pressed move the brew unit to HOME
Info:
• mA: indicates the maximum current (in mA) absorbed by the brew unit in motion;
• H/W: Becomes active when the Brew Unit reach HOME or WORK position;
• Pres: Becomes active if the Brew Unit is present in machine;
• DDr: Becomes active if the Dump box is present in machine;
• Door: Becomes active if the Service Door is closed;
• Caraf 1: Becomes active if the water spout is present;
• Caraf 2: Becomes active if the Carafe is present.
The meaning of the sectors are the following:
• Command:
• Boiler (Setting bottom): when pressed activate/deactivate the boiler if the temperature is less than 90°C
• Pump (my favorite bottom): when pressed activate/deactivate the pump
• Ev S (home bottom): when pressed activate/deactivate the Steam/Water electrovalve (24V Dc)
Page 3: Brew Unit
Page 4: Hydraulic Circuit
CADORNA TEST MODE
user guide
nomeFile
Cadorna - Test mode
v0.0_ENG.doc
1.0 F.Bolognesi 04/06/2019 Page | 4
revNum Redatto SaveDate Pagina/pagine
2.3 Brew Unit
This page allow to test the functionality of Brew Unit and the microswitchs:
e g a p t x e N
Previous page
Exit
The meaning of the sectors are the following:
• Work (my favorite bottom): when pressed move the brew unit to WORK
• Home (home bottom): when pressed move the brew unit to HOME
Info:
• mA: indicates the maximum current (in mA) absorbed by the brew unit in motion;
• H/W: Becomes active when the Brew Unit reach HOME or WORK position;
• Pres: Becomes active if the Brew Unit is present in machine;
• DDr: Becomes active if the Dump box is present in machine;
• Door: Becomes active if the Service Door is closed;
• Caraf 1: Becomes active if the water spout is present;
C
M
Y
CM
MY
CY
CMY
K
3.pdf 1 05/07/2019 14:05:08
CADORNA TEST MODE
user guide
nomeFile
Cadorna - Test mode
v0.0_ENG.doc
1.0 F.Bolognesi 04/06/2019 Page | 5
revNum Redatto SaveDate Pagina/pagine
2.4 Hydraulic Circuit
This page allow to test the functionality of hydraulic circuit:
Previous page Next page
Exit
The meaning of the sectors are the following:
•
Command:
• Boiler (Setting bottom): when pressed activate/deactivate the boiler if the temperature is less than 90°C
• Pump (my favorite bottom): when pressed activate/deactivate the pump
• Ev S (home bottom): when pressed activate/deactivate the Steam/Water electrovalve (24V Dc)
Info:
• p/s: indicate the current number of water flow expressed in pulses/sec. When is activated the pump
and one electrovalve the value measured must be equal to or greater than 10 p/s.
• Tank: Becomes active when the water into tank reach sensor level
• Frequency: indicate the frequency of mains voltage supply
• Boiler Temperature: indicate the boiler temperature in °C