Gaggia PLATINUM EVENT, Technical & Service Manual

Page: 12 / 59

Ideas with Passion
2/3
TALEA Section 03
REV00 - August 06
Platinum Swing Up
MENU
Strong aroma
Espresso coffee 08:33
To open program-
ming menu.
To select milk-based
beverage.
Confirm key.
Hot water key.
Use the touch-ring to select the
type of beverage you want.
To select coffee
aroma.
Beverage settings
To set beverage preparation parameters: press the MENU key and use the touch-ring to select “beverage settings”.
MENU
1 Beverage settings
Exit the
programming page. Reset default (factory) set-
tings.
Function depends on the cur-
rent programming level.
To save new settings.
Rotate the touch-ring to vary the
following settings:
- The amount of coffee dispensed
(1 square = approx. 15 ml).
- The amount of water added
(1 square = approx. 15 ml).
- Coffee temperature.
- Pre-brewing of coffee.
To select coffee
aroma.
At this point, you can:
Machine settings
To set general machine settings, press the MENU key, select “machine settings” then use the touch-ring to select:
2.1 Language
Italian
2.2 Cup warmer
Disabled
2.3 Beeps
Enabled
2.4 Filter alarm.
Enabled
2.5 Rinse
Enabled
2.6 Water hardness
1
2.7 Clock
To set menu language.
To set cup warmer function. To enable beep warnings.
To set machine function with
“Aqua Prima” filter.
To set water
hardness.
To set internal clock.
MENU
2 Machine settings
To exit at any time from
“Machine settings”
without saving any changes made,
press the MENU key.
To set circuit rinsing.