13
ENGLISH
>
Press the PUSH button hard.
>
Make sure that the brew group lock is in the correct position.
>
If it is still lowered, raise it until it locks in place.
>
Put the brew group back in place until it locks, without pressing the PUSH button.
>
Put back the coffee grounds drawer with the drip tray inside the machine and close
the service door.
7.2.2 Monthly lubrication of the brew group (one cleaning cycle using a lubricant)
Lubricate the brew group after about 500 coffee cups brewed or at least once a month.
The lubricating grease for the brew group can be bought separately. For further details
please refer to the
“10.1 Maintenance products”
chapter. Perform the
“Disassembly and
cleaning phase”
of the
“7.2.1 Weekly brew group cleaning cycle”
procedure.
>
Apply the grease uniformly on both side guides.
>
Lubricate the shaft too.
Perform the
“Reassembly phase”
of the
“7.2.1 Weekly brew group cleaning cycle”
procedure.
7.2.3 Monthly degreasing of the brew group (one cleaning cycle using a degreaser)
Launch this cleaning cycle with degreasing tablets after brewing 500 coffees or at least
once a month. This operation completes the brew group maintenance process. The
degreasing tablets are sold separately. For further details please refer to the
“10.1
Maintenance products”
chapter.
Degreasing tablets are recommended only for cleaning purposes, they have no
descaling properties. For descaling, use the Gaggia descaling product and follow the
procedure described in the
“7.5 Descaling cycle”
chapter.
>
Place a large container (1.5 l) under the dispensing spout.
Burning hazard! Be careful of hot water or steam sprays.
>
Make sure to fill the water tank with fresh water to the MAX level.
Do not place pre-ground coffee in the pre-ground coffee compartment.
>
Place a degreasing tablet in the pre-ground coffee compartment.
PUSH
N
PUSH
PUSH
N
PUSH
N
MAX
CALC
CLEAN
MAX
C
