Gaggia Milano VIVA PRESTIGE RI84 Series, Manual

Page: 12 / 156

Brewing coffee with coffee pods
Note: Only use the coffee pod filter and coffee pod filter adapter with coffee pods
1 Use a teaspoon to remove the ground coffee filter from the pressurized filter holder (Fig. 19).
2 Insert the pod filter adapter with the convex side facing down into the pressurized filter holder (Fig.
20).
3
Place the coffee pod filter on top of the pod filter adapter in the filter holder (Fig. 21).
4
Insert the pressurized filter holder into the brew unit from below (Fig. 11).
5 Turn the filter holder from left to right until it locks into place and release the filter holder grip (Fig.
12). The handle will turn to the left slightly.
Note: For the first coffee brewing session, you need to preheat the pressurized filter holder.
6 Brew one cup of water. Turn the selection knob to the standby position to stop brewing (Fig. 9).
7 Turn the filter holder from right to left to remove it from the machine and pour out the remaining
water (Fig. 15).
8 Insert a coffee pod into the filter holder (Fig. 22).
Note: Make sure the paper of the pod does not stick out beyond the edge of the filter holder.
9
Insert the filter holder into the brew unit from the below.
10
Turn the filter holder from left to right until it locks into place and release the filter holder grip. The
handle will turn to the left slightly.
11 Place a cup under the filter holder.
12
Turn the selection knob to the coffee position (Fig. 8).
-
The machine starts brewing coffee.
13
Turn the selection knob to the standby position when the cup contains the desired amount of
coffee.
14 Remove the filter holder and throw away the used coffee pod.
Dispensing hot water
Warning: To avoid the danger of burns, be aware that dispensing may be preceded by
small jets of hot water and only move the steam wand by means of the protective
handle.
1 Place a container or a glass under the classic milk frother.Turn the hot/water steam knob
anticlockwise (Fig. 6).
2 Turn the selection knob to the coffee position. (Fig. 8)
-
The machine starts dispensing hot water.
3 Turn the selection knob to the standby position when the machine has dispensed the desired
amount of water (Fig. 9).
4
Turn the hot/water steam knob clockwise. Remove the container or the glass (Fig. 10).
Frothing milk
Warning: To avoid the danger of burns, be aware that dispensing may be preceded by
small jets of hot water and only move the steam wand by means of the protective
handle.
1 Place a cup under the milk frother.
2
Turn the selection knob to the steam position
12
English