English
25
Meaning of error codes
Error code
Problem
Cause
Possible solution
1
Coffee grinder blocked
Coffee exit duct clogged Clean the coffee exit
duct thoroughly with
the handle of the
multifunctional tool or a
spoon handle.
3 - 4
The brew group cannot
be removed.
The brew group is not
positioned correctly.
Close the maintenance
door. Switch the
machine off and back
on again. Wait for the
‘machine ready’ icon on
the display and then
remove the brew group.
5
Water circuit problem
There is air in the water
circuit.
Remove and place
back the water tank a
couple of times. Make
sure you insert it into
the machine properly.
Check if the water tank
compartment is clean.
Other error codes
Switch the machine off
and switch it back on
again after 30 seconds.
Try this 2 or 3 times.
If the above solutions do not help to remove the error code icon from the
display and bring the machine back to normal working order, contact the
Gaggia hotline. Contact details can be found in the warranty booklet or or
visit
www.gaggia.com
or
www.gaggia.it
.
Troubleshooting
Problem
Cause
Solution
The machine does not
switch on
The machine is disconnected.
Check if the power supply cord is
inserted correctly
The machine is in DEMO
mode.
The standby button has been
pressed for more than 8 seconds.
Switch the machine off and then
on again using the main switch on.
The drip tray is quickly
filled.
This is normal. The machine uses
water to rinse the internal circuit
and brew group. Some water flows
through the internal system directly
into the drip tray.
Empty the drip tray when the 'drip
tray full' full indicator pops up
through the drip tray cover.
Place a cup under the dispensing
spout to collect rinsing water.
