English
13
Manual rinsing cycle
1 Place a container under the coffee dispensing spout.
2 Press the AROMA STRENGTH button to select pre-ground coffee. Do not
add pre-ground coffee.
3 Press the ESPRESSO LUNGO button. The machine starts dispensing
water.
4 When the machine stops dispensing, empty the container. Repeat steps
1-3 twice.
5 Press the SPECIAL DRINKS button. Place a container under the hot water
dispensing spout.
6 Press the UP/DOWN buttons to scroll through the options of the display.
Press the OK button to select ‘hot water’.
-
The display reminds you have to install the hot water dispensing
spout (if not present), press the OK button to confirm.
7 Press the OK button to start hot water dispensing.
-
Dispense water until the display shows the no water icon.
8 Fill the water tank with fresh water up to the MAX level and remove the
container.
The machine is ready for use.
Water filter
The water filter is designed to reduce limescale deposits in your
coffee machine and provide filtered water to preserve the aroma and flavor
of each cup of coffee.
Installing the water filter
1 Remove the small white filter from the water tank and store it in a dry
place.
Note: Please keep the small white filter for future use.You will need it for the
descaling process.
2 Remove the filter from its packaging and immerse it in cold water with
the opening pointing upwards. Press the sides of the filter gently to let out
the air bubbles.
3 Place the filter in the empty water tank. Press it down until it cannot
move any further.
4 Fill the water tank with fresh water up to the MAX indication and place it
the machine.
5 Select the hot water function and dispense hot water until the water tank
is empty (see chapter ‘Using the machine’, section ‘Brewing special drinks').
6 Refill the water tank with fresh water up to the MAX indication and place
it back into the machine.
7 Press the MENU button to enter the menu.
8 Press the DOWN button until the display shows the following icon.
WATER
FILTER
FI
LT
ER
