Gaggia Milano SUP047RG, User Manual

Page: 26 / 88

Recycling
- This symbol means that this product shall not be disposed of with normal
household waste (2012/19/EU).
- Follow your country's rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative
consequences for the environment and human health.
Troubleshooting
Problem Cause Solution
The machine does not
switch on The machine is disconnected. Check if the power supply cord is
inserted correctly
The machine is in DEMO
mode. The standby button has been
pressed for more than 8 seconds. Switch the machine off and then
on again using the main switch on.
The drip tray is quickly
filled. This is normal. The machine uses
water to rinse the internal circuit and
brew group. Some water flows
through the internal system directly
into the drip tray. Empty the drip tray when the 'drip
tray full' full indicator pops up
through the drip tray cover.
Place a cup under the dispensing
spout to collect rinsing water.
The coffee grounds
container full icon remains
displayed. The coffee grounds container was
emptied while the machine was
switched off. Always empty the coffee grounds
container while the machine is ON.
If the coffee grounds container is
emptied while the machine is
switched off, the coffee cycle
counter is not reset. In that case,
the 'empty coffee grounds
container' message will stay on the
display even though the container
is not full.
The coffee grounds container was
placed back too fast. Do not place back the coffee
grounds container until the screen
message prompts you to put it
back
The brew group cannot be
removed. The brew group is not positioned
correctly. Close the maintenance door.
Switch the machine off and back
on again. Wait for the machine
ready screen to appear and then
remove the brew group
The coffee grounds container is not
removed. Remove the coffee grounds
container before removing the
brew group
25
English