8
ENGLISH
Using the Machine for the First Time
When using the machine for the first time, the following activities need to happen:
1
the circuit needs to be primed;
2
the machine will perform an automatic rinse cycle.
3
you need to perform a manual rinse cycle.
Circuit Priming
During this process, fresh water flows through the internal circuit to heat up the
machine. This takes a few minutes.
1
Place a container under the steam wand.
2
Press the “ ” button for 5 seconds to start the cycle. The machine starts the
automatic priming of the circuit by dispensing some water through the steam
wand.
3
When this process has been completed, the “
” e “
” buttons will flash.
The machine is heating up.
Naviglio milk en-nl-pl.indd 8
01/08/2019 09:46:24
