Gaggia Milano CLASSIC RI9380, Operating Instructions Manual

Page: 32 / 33

32
ENGLISH
In case of malfunction
Problem:
Make sure that:
No brewing
.
There is water in the tank .
The filter is not clogged because the mixture is too fine or the coffee
is too pressed .
The screen is clean
.
The coffee brews too fast
(less than
20
seconds
).
The coffee has not been ground too coarsely
.
The coffee has been pressed with the tamper .
The pump is too noisy .
There is water in the tank
.
The pump has been activated (see circuit loading
).
There is enough coffee
.
Excessive loss of water from
the filter holder .
The filter holder has been inserted correctly
(
Fig
.1-17).
The seal is not dirty ( Fig .16).
There are no coffee residues on the edge of the filter holder
.
The espresso is not creamy
enough
.
The coffee has not been ground too coarsely .
The coffee has been pressed with the tamper
.
The coffee is not too old or dry .
The traditional filter has been used with the frothing jet device
(
Fig
.1-16).
The coffee is too cold .
The machine has been heated
.
The coffee has not been ground too coarsely .
The coffee has been brewed in cold cups . It is recommended to always
brew coffee in
warm cups
.
The filter holder has not been preheated (Only for the
1
st coffee
).
The milk does not froth
enough
.
The steam nozzle is not clogged
.
The steam nozzle has not been inserted too deep in the j 니 g .
The milk is not too hot .
The machine squirts coffee
out from the filter holder
.
The frothing jet device was installed with the "crema perfetta " filter .
The machine housing and the
drain hose are hot
.
The steam button is off .