Gaggia Milano CLASSIC RI9380, Operating Instructions Manual

Page: 30 / 33

30
ENG
니
SH
Cleaning the filter holder and the
filters --------------------------------------
The filters should be kept clean to guarantee
perfect res
니
Its.
Warning! The filter must only be replaced
when the filter holder cup has cooled down
completely to avoid b
니
ms.
Everyday, remove the filter from
the filter holder as described in
(Fig.14) and wash it with warm
water.
If yo
니
notice a malfunction
when brewing coffee, immerse
the filters in boiling water for 10
miruites and then rinse them
with running water.
To clean the filters more
thoro
니
ghly, we recommend
using the GAGGIA cleaning tablets specifically
designed to keep ycMjr machine in perfect working
order.
Cleaning the grill and drip tray —
Remove the drip tray and the grill (Fig.1-10,11)
and wash them with water. Do not use abrasive
cleaning tools.
Cleaning the water tank -----------
Warning! To avoid bums, the tank should be
cleaned only when the machine is t
니
med off.
The drain hose (Fig. 11) may reach high tem­
peratures during operation.
Remove the water tank (Fig.1 -13) and wash it with
fresh water.
To remove the water tank, first remove the drip tray
(Fig 1-11), and then remove the drain pipe (Fig.11)
by polling it downwards.
Note. When reinserting the tank, make sure that
thesiliconetubes are inside thetankandthatthey
are neither twisted nor blocked (Fig.12).
Cleaning the screen ----------------
Regularly remove any resid
니
al coffee g
「
o
니
nds from
the screen (Fig.16)
니
sing a br
니
sh and wash with hot
water following the instructions given in the section
"How to lower the temperature".
Cleaning after a long period of
inactivity ---------------------------------
When the machine is not
니
sed for a long time (more
than two weeks), follow the instructions given in
the section "When using for the first time or after
a period of inactivity of more than 2 weeks".
Descaling------
Limescale normally builds
니
p
with the
니
se of the appliance.
Use the GAGGIA descaling
prod
니
ct only. Its formula has
been designed to ens
니
re bet­
ter machine performance and
operation for its whole operat­
ing life. If correctly
니
sed, it also
avoids alterations in the brewed
prod
니
ct. Never
니
se vinegar or
other descaling agents.
Descaling should be performed
every 2 months.
Warning! Never drink the descaling solution or
any products dispensed until the cycle has been
carried o
니
t to the end.
1. Insert the filter holder (Fig.1-17) into the brew
unit (Fig.1-8) from the bottom, aligning the
reference mark on the filter holder handle with
the (•) icon on the front panel of the machine
(Fig.3). Turn the filter holder from left to right
until it locks into place on the (▼) icon (Fig.4).
2. Remove and empty the water tank (see the
chapter "Cleaning the water tank").
3. Po
니
r HALF the content of the descaling s
이니
-
tion into the water tank and fill it with fresh
water
니
p to the max level.
4. T
니
rn the machine on by pressing the on/off
button (Fig.1-2).
Dispense 2 c
니
ps of water (abo
니
1150 ml each)