22
If you are unable to finish the descaling procedure
If the machine gets stuck in the descaling procedure, you can press the on/off
button.This allows you to complete the descaling procedure. Follow the steps
below to make sure your machine is ready to brew coffee again.
2
Fill the water tank with fresh tap water up to the MAX indication and slide the
water tank back into the machine.
3
Empty the bowl and place it back onto the drip tray under the hot water/steam
wand.
4
Press the espresso button and brew a cup of espresso. Repeat this twice.
5
Turn the control dial to the hot water icon.
6
Let hot water flow out of the hot water/steam wand until the ‘water tank empty’
light lights up continuously.
Note:
If you want to interrupt the water flow, turn the control dial back to the coffee
bean icon. To restart the water flow, turn it back to the hot water icon
.
7
Remove the drip tray, rinse it and place it back.
8
Reattach the classic milk frother.
9
Remove the water tank and rinse it.
10
Reinstall the water filter (if present)
.
11
Fill the water tank with fresh tap water up to the MAX indication and slide the
water tank back into the machine.
12
Press the on/off button to switch off the machine.
- When you switch the machine back on, it is ready for use again.
22
ENGLISH
Summary of Contents for BESANA
Page 2: ...1...
