background image

Caution, risk of burns! Before cleaning, please
wait until the appliance has cooled to hand-
warm.

Cleaning the grill after every use avoids residues
burning in. If residues have burned in several
times, they are difficult to remove. 

Do not use scouring agents, abrasives or chemically
aggressive cleaners (i.e. oven cleaner)! Do not use
any nitro polishing agents for cleaning, or any
abrasive sponges.

Use the included cleaning brush to clean the grid
iron after every use.

Remove both grid irons. Tilt both grilling elements
up and take off the lava stone container with the
lava stones.

Clean the 

grease collecting tray

in a dishwasher

after removing food remnants.

Clean the 

grid irons 

with the cleaning brush or

with dishwashing detergent and a dishwashing
brush. Soak burnt-in residues in a little water and
detergent. Please note: do not clean the grid irons
in a dishwasher.

Clean the 

stainless steel base and the work

surface 

with detergent and hot water. Soak

stubborn residues with a little detergent solution.
You can also clean the base with a stainless steel
cleaner.

The 

lava stones

must be replaced when they are

black. In this case, the lava stones have become
saturated with grease. Fat might ignite if too much
fat has accumulated on the lava stones. You can
order lava stones by quoting the order number 
LV 030-000.

Wash the

lava stone container 

thoroughly with

rinsing detergent and dry it. Pour the lava stones
back into the lava stone container and tilt down the
grilling elements. The grilling elements must lie
flat. 

To soak up fat on the 

griddle plate

, sprinkle

coarse salt onto the grilling surface after use. 
Mix the salt with the grease until it has become
saturated with the grease. Remove the salt and
wipe it away with a dry cloth. Soak burnt-in residues
in a little water and detergent and clean with a
dishwashing brush. Please note: do not clean the
griddle plate in a dishwasher. It is advisable to rub
the griddle plate with a little oil if it is not in use for
a prolonged period of time.

Wipe the 

control knobs

with a damp cloth. The

cloth should not be too wet, as moisture could
penetrate behind the control knob. 

13

7. Cleaning and care

Note: 

to avoid jeopardising the electrical safety of

the appliance, do not use high-pressure or steam
jet cleaning devices – risk of short circuits!

Summary of Contents for VR 421-611

























Reviews: