Gaggenau VP 414 111, Instruction Manual, Page: 12 / 48

12
en
Trouble shooting
Trouble shooting
Trouble shooting
Faults often have simple explanations. Please read the
information in the table before calling the after-sales
service.
m
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out by one of our trained after-sales engineers.
If the appliance is faulty, unplug the mains plug or
switch off the fuse in the fuse box. Contact the after-
sales service.
--------
Disruption Possible cause Solution
The appliance is not working The plug is not plugged into the
mains Connect the appliance to the electricity supply
The fuse/circuit breaker is faulty Check in the fuse box to make sure that the
fuse/circuit breaker for the appliance is in work-
ing order
Power failure Check whether other kitchen appliances are
working
The appliance is not working and the illu-
minated ring behind the control knob is
flashing orange and white alternately Power failure Check whether other kitchen appliances are
working
The appliance does not heat up when it
is switched on.
All of the illuminated rings behind the
control knobs light up white for
10 seconds after switch-on. Then the
illuminated ring around the active con-
trol knob lights up orange.
Demo mode is activated Deactivate demo mode.
~
"Demo mode"
on page 13
The appliance does not heat up when it
is switched on.
The illuminated ring behind the control
knob is flashing yellow and magenta
alternately.
Electronics fault Contact after-sales service
The appliance switches off while operat-
ing.
The illuminated ring behind the control
knob is flashing orange and white alter-
nately.
Safety switch-off function:
The controls on the appliance
have not been used for a long
time. Turn the temperature control knob to 0, then
switch it back on, if required.
The appliance switches off while operat-
ing.
The illuminated ring behind the control
knob is flashing orange and white alter-
nately.
Domestic power failure:
Following a power failure, the
appliance will remain switched
off for safety reasons. Turn the temperature control knob to 0, then
switch it back on, if required.