14
en
Home Connect
Connection to the router unsuccessful
1
If a connection could not be established, check the
router, and turn the control knob to another position
and then back to position
1
.
The illuminated ring on the control knob lights up
blue. After around five seconds, the illuminated ring
around the control knob flashes blue and yellow.
2
Switch to the general settings menu of your mobile
device and start the Wi-Fi connection again.
Connection to the mobile device unsuccessful
1
If a connection could not be established, turn the
control knob to another position and then back to
position
1
.
The illuminated ring on the control knob lights up
blue. After around five seconds, the illuminated ring
around the control knob flashes blue and white.
2
Launch the Home Connect app on your mobile
device and follow the instructions for automatic
network login.
Connecting more mobile devices to the same Home
Connect account
In the Home Connect app, you can connect more mobile
devices to your appliance.
Connecting more mobile devices to another Home
Connect account
Prerequisite: A mobile device is connected to the
appliance. The appliance can be found in the Home
Connect settings menu.
1
Turn the control knob to another position and then
back to position
1
.
The illuminated ring around the control knob
flashes blue and white. The appliance is now ready
to connect to another mobile device.
2
Launch the Home Connect app on your mobile
device and follow the instructions for automatic
network login.
The appliance is available in the app on the mobile
device once the illuminated ring around the control
knob lights up green.
Exiting the Home Connect settings
menu
1
Carry out the following operating steps one after
the other without interruption.
2
Close the Home Connect settings menu.
~
"Opening or closing the Home Connect
settings menu" on page 11
The illuminated ring on the control knob goes out.
Connecting the appliance to your
home network (LAN)
The appliance must be connected to the home network
using a LAN cable.
1
Connect the LAN cable (RJ45) to the router and the
appliance.
2
Reset the Home Connect
connections.
~
"Resetting the Home Connect
connections" on page 15
3
Remain in the Home Connect settings menu.
4
Turn the control knob to
<
.
The illuminated ring around the control knob
flashes blue and white alternately.
5
Start the Home Connect app on the mobile device
and follow the instructions.
6
As soon as the network connection is established,
exit the Home Connect settings menu.
~
"Exiting
the Home Connect settings menu" on page 14
7
Push in the control knob and turn it anti-clockwise
to the
h
position. Otherwise, it is not possible to
operate the appliance using the Home Connect
app.
Switching network connection (LAN or
Wi-Fi) off and on
You can switch off the LAN or Wi-Fi on your hob
extractor system at any time (e.g. to save energy during
a holiday). The connections to the home network and to
the hob remain saved. When you switch the LAN or
Wi-Fi back on, the saved connections are applied.
1
Carry out the following operating steps one after
the other without interruption.
2
Open the Home Connect settings menu.
~
"Opening or closing the Home Connect
settings menu" on page 11
The illuminated ring on the control knob lights up
blue.
3
Turn the control knob clockwise to position
3
. The
illuminated ring around the control knob lights up
green.
After around five seconds, the illuminated ring
around the control knob flashes blue. After a few
seconds, the illuminated ring around the control
knob lights up blue. The network connection is
deactivated.
4
Close the Home Connect settings menu.
~
"Opening or closing the Home Connect
settings menu" on page 11
The illuminated ring on the control knob goes out.
If you want to switch the network connection back on,
work through the same operating sequence. The
illuminated ring on the control knob lights up blue. After
around five seconds, the illuminated ring around the
control knob flashes blue and then lights up green.