12
en
Home Connect
▯
If the appliance has established a connection with
the home network, the illuminated ring around the
control knob lights up green.
▯
If the appliance was not able to establish a
connection with the home network, the illuminated
ring around the control knob lights up red. Start the
connection process again.
Overview of the Home Connect
settings menu
▯
Manually logging in to the home network (Wi-Fi): To
log in to the home network (Wi-Fi) manually, you
require the network name (SSID) and password
(key) for your home network.
~
"Manual
registration in the home network" on page 12
▯
Log in to the home network (Wi-Fi) with a WPS-
enabled router.
~
"Logging in to your home
network automatically (WPS)" on page 13
▯
Direct connection to a compatible hob.
~
"Connecting appliances directly" on page 17
▯
Switch LAN or Wi-Fi off and on, e.g. while on
holiday.
~
"Switching network connection (LAN or
Wi-Fi) off and on" on page 14
▯
Reset the Home Connect connections, e.g. new
router, changing to a new Internet service
provider.
~
"Resetting the Home Connect
connections" on page 15
Connecting the appliance to your
home network (Wi-Fi)
1
Carry out the following operating steps one after
the other without interruption.
2
Open the Home Connect settings menu.
~
"Opening or closing the Home Connect
settings menu" on page 11
The illuminated ring on the control knob lights up
blue.
Manual registration in the home
network
Note:
To log in to the home network (Wi-Fi) manually,
you require the network name (SSID) and password
(key) for your home network.
1
Turn the control knob clockwise to the
<
position.
After around five seconds, the illuminated ring for
the control knob flashes blue and yellow alternately.
The appliance is now in manual mode.
2
Switch to the general settings menu of your mobile
device and call up the Wi-Fi settings.
On your mobile device, the "HomeConnect" Wi-Fi
connection is available for around 20
minutes.
13
Home Connect
en
3
Connect to the "HomeConnect" Wi-Fi connection
(password: "HomeConnect").
4
Launch the Home Connect app on your mobile
device and follow the instructions for network login.
Enter the password (key) of the home network.
Following successful connection to the router, the
illuminated ring around the control knob lights up
green for around three seconds.
5
The illuminated ring around the control knob
flashes blue and white alternately. The connection
to the mobile device is being established.
The appliance is available in the app on the mobile
device once the illuminated ring around the control
knob lights up green. If the illuminated ring around
the control knob lights up red, it was not possible to
establish a connection
6
To save the connection, exit the Home Connect
settings menu.
~
"Exiting the Home Connect
settings menu" on page 14
7
After successfully connecting, push in the control
knob and turn it anti-clockwise to the
h
position.
Otherwise, it is not possible to operate the
appliance using the Home Connect app.
Connection to the router unsuccessful
1
If a connection could not be established, check the
router and turn the control knob to another position
and then back to the
<
position.
The illuminated ring on the control knob lights up
blue. After around five seconds, the illuminated ring
around the control knob flashes blue and yellow.
2
Switch to the general settings menu of your mobile
device and start the Wi-Fi connection again.
3
Check that the password has been entered
correctly.
Connection to the mobile device unsuccessful
1
If a connection could not be established, turn the
control knob to another position and then back to
the
<
position.
The illuminated ring on the control knob lights up
blue. After around five seconds, the illuminated ring
around the control knob flashes blue and white.
2
Launch the Home Connect app on your mobile
device and follow the instructions for automatic
network login.
Connecting more mobile devices to the same Home
Connect account
In the Home Connect app, you can connect more mobile
devices to your appliance.
Connecting more mobile devices to another Home
Connect account
Prerequisite: A mobile device is connected to the
appliance. The appliance can be found in the Home
Connect settings menu.
1
Turn the control knob to another position and then
back to the
<
position.
The illuminated ring around the control knob
flashes blue and white. The appliance is now ready
to connect to another mobile device.
2
Launch the Home Connect app on your mobile
device and follow the instructions for automatic
network login.
The appliance is available in the app on the mobile
device once the illuminated ring around the control
knob lights up green.
Logging in to your home network
automatically (WPS)
You require a router that has WPS functionality. You can
find information about this in the manual for your router.
You need to be able to access your router.
If this is not the case, follow the steps in
~
"Manual
registration in the home network" on page 12
.
1
Push in the control knob and turn it to position
1
.
During the connection process, the illuminated ring
around the control knob flashes blue and yellow
alternately.
2
Press the WPS button on the router within the next
two minutes.
Following successful connection to the router, the
illuminated ring around the control knob lights up
green for around three seconds. Then the
illuminated ring around the control knob flashes
blue and white alternately. The appliance is now
ready to connect to your mobile device.
3
Launch the Home Connect app on your mobile
device and follow the instructions for automatic
network login.
The appliance is available in the app on the mobile
device once the illuminated ring around the control
knob lights up green. If the illuminated ring around
the control knob lights up red, it was not possible to
establish a connection.
4
To save the connection, exit the Home Connect
settings menu.
5
After successfully connecting, push in the control
knob and turn it anti-clockwise to the
h
position.
Otherwise, it is not possible to operate the
appliance using the Home Connect app.