Installation instructions
en
19
Installation above a drawer
The worktop must be at least 20 mm thick.
In order to guarantee good ventilation, the clearance
between the surface of the worktop and the upper area
of the drawer must be at least 65 mm.
Note:
Only use a wooden intermediate shelf if metal
objects in the drawer reach high temperatures due to
the recirculating air from the hob's ventilation.
Installation above an oven
The worktop must be at least 30 mm thick.
To ensure good ventilation, the distance between the
oven and the hob must be at least 5 mm.
Notes
¡
If the clearance between the hob and the oven
needs to be increased, refer to the installation in-
structions for the oven.
¡
If you install the hob above an oven made by an-
other brand, use a wooden intermediate floor.
17.6 Instructions for the electrical
connection
In order to safely connect the appliance electrically, ob-
serve this information.
¡
Check the household wiring before connecting the
appliance. Ensure that there is sufficient fuse protec-
tion for the household wiring. The voltage and fre-
quency of the appliance must match the electrical
installation (see rating plate).
¡
Ensure that the power supply is properly earthed,
that the fuse protection is sufficient and the cable
and wiring system in the building is sufficiently di-
mensioned for the electrical power of the appliance.
¡
Route the connection cable in such a way that it
does not touch the hot casing.
¡
Use only the connection cable that is supplied with
the appliance or is provided by technical customer
service.
¡
This appliance complies with the EC interference
suppression regulations.
¡
The appliance corresponds to protection class 1.
You should therefore only use the appliance with a
protective earth connection.
¡
Ensure that the protection against contact is guaran-
teed during installation.
¡
Only a qualified electrician may connect appliances
without a plug. They are subject to the requirements
of the local electricity provider. We recommend in-
stalling a residual-current-operated circuit-breaker
(RCCB) in the appliance's power supply circuit.
¡
Carry out the electrical connection in accordance
with the installation instructions. The appliance may
be damaged if it is not connected correctly.
¡
The manufacturer shall assume no liability for mal-
functions or damage resulting from incorrect elec-
trical wiring.
17.7 Combining multiple appliances
Requirement:
You need a suitable connection strip to
combine several Vario appliances. You can obtain the
connection strip as an optional accessory.