en
Preventing material damage
10
Preventing material damage
2 Preventing material
damage
Preventing material damage
2.1 Safe installation
Follow the instructions when installing
the appliance.
ATTENTION!
Improper installation of the appliance
may cause damage.
▶
If the dishwasher is installed above
or below other domestic appli-
ances, follow the information on in-
stallation in combination with a
dishwasher in the installation in-
structions for the individual appli-
ances.
▶
If there is no information or if the
installation instructions do not in-
clude the relevant information, con-
tact the manufacturer of these ap-
pliances to check that the dish-
washer can be installed above or
below these appliances.
▶
If no information is available from
the manufacturer, the dishwasher
should not be installed above or
below such appliances.
▶
To ensure the safe operation of all
domestic appliances, continue fol-
lowing the installation instructions
for the dishwasher.
▶
When a dishwasher is installed un-
derneath the hob, please call our
nationwide service hotline before-
hand. Please contact our customer
service and give the dimensions of
your kitchen cabinet and any other
information relevant to installation.
Then order the combi installation
accessory kit 10014648. Installa-
tion must be carried out by spe-
cialist customer service staff. Im-
proper installation can cause
safety risks such as leakage, fault
current, fire, etc.
▶
Do not install the dishwasher near
heat sources, e.g. radiators, heat
storage tanks, ovens or other ap-
pliances that generate heat.
Modified or damaged water hoses
may result in material damage and
damage to the appliance.
▶
Never kink, crush, modify or cut
through water hoses.
▶
Only use the water hoses supplied
with the appliance or genuine
spare hoses.
▶
Never re-use water hoses that
have been used before.
If the water pressure is too high or
too low, the appliance may not be
able to operate properly.
▶
Make sure that the water pressure
in the water supply system is min.
50 kPa (0.5 bar) and max.
1000 kPa (10 bar).
▶
If the water pressure exceeds the
maximum value specified, a pres-
sure-reducing valve must be in-
stalled between the drinking water
connection and the hose set of the
appliance.
2.2 Safe use
Follow the instructions when using
the appliance.
ATTENTION!
Escaping water vapour can damage
fitted units.
▶
When the programme ends, leave
the appliance to cool down for a
while before opening the door.
Special salt for dishwashers can
damage the tub due to corrosion.
▶
To make sure that any special salt
that escapes is washed out of the
tub, add the special salt to the dis-
penser for special salt immediately
before the programme starts.
