Basic settings
en
43
Basic setting
Selection
Description
Water connection
Cold water
1
Hot water
Set cold water or hot water connec-
tion.
Only set the appliance to hot water if
this can be prepared with little energy
and a suitable installation is available,
e.g. solar heating system with circula-
tion line. The water temperature
should be at least 40 °C and max.
60 °C.
Eco forecast
on
off
1
Switch EcoCheck on or off.
When selecting the programme, the
average water consumption and en-
ergy consumption is briefly shown on
the display.
Emotion Light
off
On via main
switch
1
On on opening
door
Switch the interior lighting of the appli-
ance on or off.
When the appliance door is opened,
the interior lighting switches off auto-
matically after 10 minutes.
Status Light
on
1
off
Switch "Status Light" on or off.
While the programme is running, a
strip of light appears on the left-hand
side of the appliance. If the appliance
door is not completely closed, the
strip of light will flash. The programme
has ended when the strip of light is no
longer visible on the left-hand side.
Start programme
Eco
1
Prog. last selected
Set a default programme for when the
appliance is switched on.
Tone volume
Scale with multiple
levels.
Set the signal volume at the end of
the programme.
Level 0 switches the signal tones off.
Button volume
Scale with multiple
levels
Set the button volume during opera-
tion.
Level 0 switches the button tones off.
1
Factory setting (may vary according to model)
