14
Figure 33
Figure 34
1/8”
3mm
Figure 32
Figure 35
Figure 31
• Do not pre-twist the wires before connecting them
with wire nuts.
• Extend the dishwasher’s stranded wires 1/8”
(3mm) beyond the power supply cable’s solid
wires, as shown in
Figure 31
.
5
Using the supplied wire nuts, connect the electrical
supply wires to the dishwasher’s wires, black to
black, white to white, and green or bare. Make certain
that the insulated wires show no bare wire from the
bottoms of the wire nuts. Gently tug the wires to make
certain they are securely connected.
6
Press the wires into the junction box as shown in
Figure 32
. Make certain that the wire nuts do not
loosen.
7
Place the cover on the junction box and secure it to
the junction box with the supplied screw.
DOOR TENSION ADJUSTMENT
(only on
fully integrated models with custom
door panels)
After the dishwasher and custom door panel are
installed, open and close the door several times to make
sure that it does so with ease. If the door falls open too
quickly, the spring tension needs to be adjusted.
To Adjust the Spring Tension:
1
Obtain the provided Spring Tension Screws from the
Integrated Door Panel Installation Kit.
2
Insert the screws as shown in
Figure 33
. Turning the
screw clockwise increases the spring tension.
TOE PANEL INSTALLATION
Method A - Regular Toe Panel Installation
Install the Toe Panel Mounting Brackets
Step 1 -
Insert the short leg of the Toe Panel Mounting
Bracket into the recess of the dishwasher base as shown
in
Figure 34
.
Step 2 -
Use the toe panel screws from the Dishwasher
Installation Kit and a T-15 screwdriver to install the toe
panel as shown in
Figure 35
.
BASE AND TOE PANEL (Continued)
Method B - Plastic Base Access Panel and Toe Panel
Installation (select models)
1
Place the Plastic Base Access Panel under and up
the front bottom panel of the dishwasher, as shown in
Figure 36a
.
2
Insert the Plastic Base Access Panel screws into the
Plastic Base Access Panel, as shown in
Figure 36b
.
ELECTRICAL CONNECTION (continued)
Electrical Connection/ Door Tension Adjustment/ Base and Toe Panel
Avoid Fire Hazard
Make sure there are no loose electrical
connections. Make sure all electrical
connections are properly made.
WARNING
