Cleaning and maintenance
en
39
3.
Remove the micro filter (1).
Press together the locking catches (2) and remove
the coarse filter (3).
4.
Remove any residue and clean filters under running
water.
5.
Re-install filter system in reverse sequence
and ensure that the arrow marks are opposite each
other after closing the filter system.
Spray arms
Limescale and contaminants in the rinsing water may
block nozzles and bearings on the spray arms
1:
and
1Z
.
1.
Check outlet nozzles on the spray arms
for blockages.
2.
Unscrew the upper spray arm
1:
(1) and remove
downwards (2).
3.
Remove the lower spray arm
1Z
upwards.
4.
Clean spray arms under running water.
5.
Re-engage or screw on spray arms.
