Gaggenau DF 250, User Manual

Page: 51 / 68

Troubleshooting
en
51
Errors Cause Troubleshooting
E:18 or indicator for water
supply lights up.
5.
Remove the filter from the supply
hose
6.
Clean the filter.
7.
Re-insert the filter in the supply hose.
8.
Screw the water connection back on.
9.
Check the water connection for leaks.
10.
Restore the power supply.
11.
Switch the appliance on.
E:22 lights up. Filters are soiled or blocked.
▶
Clean the filters.
→ "Cleaning filters", Page 48
E:24 lights up. Wastewater hose is blocked
or kinked.
1.
Reposition the wastewater hose
without kinks.
2.
Remove residues.
Siphon connection is still
sealed.
▶
Check the connection to the siphon
and open if necessary.
Cover of the wastewater
pump is loose.
▶
Secure the cover of the Wastewater
pump
→ Page 62 so it clicks into
position.
E:25 lights up. Wastewater pump is blocked.
▶
Clean the wastewater pump.
→
"Clean wastewater pump",
Page 62
Cover of the wastewater
pump is loose
▶
Secure the cover of the Wastewater
pump
→
Page 62 so it clicks into
position.
E:27 lights up. Mains voltage is too low. This is not a fault on the appliance.
1.
Contact an electrician.
2.
Have the mains voltage and electrical
installation checked by an electrician.