background image

7

 Important safety information      

en

m

Warning – Risk of electric shock! 

Incorrect repairs are dangerous. Repairs 
may only be carried out and damaged 
power cables replaced by one of our 
trained after-sales technicians. If the 
appliance is defective, unplug the 
appliance from the mains or switch off the 
circuit breaker in the fuse box. Contact the 
after-sales service.

Risk of electric shock! 

Do not use any high-pressure cleaners or 
steam cleaners, which can result in an 
electric shock.

Risk of electric shock! 

A defective appliance may cause electric 
shock. Never switch on a defective 
appliance. Unplug the appliance from the 
mains or switch off the circuit breaker in the 
fuse box. Contact the after-sales service.

Risk of electric shock! 

Cracks or fractures in the glass ceramic 
may cause electric shocks. Switch off the 
circuit breaker in the fuse box. Contact the 
after-sales service.

m

Warning – Electromagnetic hazards! 

This appliance complies with safety and 
electromagnetic compatibility standards. 
However, people with pacemakers or 
insulin pumps must refrain from using this 
appliance. It is impossible to ensure that all 
of these devices available on the market 
comply with current electromagnetic 
compatibility standards, and that 
interference which may prevent the device 
from working correctly will not occur. It is 
also possible that people with other types 
of devices, such as a hearing aids, could 
experience some discomfort.

Hazard due to magnetism! 

The wireless temperature sensor and the 
twist knob are magnetic. The magnetic 
elements may damage electronic implants, 
e.g. pacemakers or insulin pumps. People 
fitted with electronic implants should 
therefore not carry the temperature sensor 
or the twist knob in their pocket and always 
keep these items at least 10 cm away from 
their pacemaker or similar medical device.

m

Warning – Risk of injury! 

When cooking in a bain marie, the hob and 
cooking container could shatter due to 
overheating. The cooking container in the 
bain marie must not directly touch the 
bottom of the water-filled pot. Only use 
heat-resistant cookware.

Risk of injury! 

Saucepans may suddenly jump due to 
liquid between the pan base and the 
hotplate. Always keep the hotplate and 
saucepan bases dry.

Risk of injury! 

Cookware and cooktops become very hot. 
Never reach across the hot cooktop or take 
hold of hot cookware.

Risk of injury! 

The wireless cooking sensor is equipped 
with a battery, which may become damaged 
if it is exposed to high temperatures. 
Remove the sensor from the cookware and 
store it away from any heat sources. 

Risk of injury! 

The temperature sensor may be very hot 
when removing it from the saucepan. Wear 
oven gloves or use a tea towel to remove it.

Risk of injury! 

Unsuitable woks may cause accidents. 
Only use woks supplied by the 
manufacturer (available as optional 
accessories).

m

Warning – Risk of fault! 

A fan is located on the underside of this hob. If 
a drawer is located on the underside of the 
hob, do not store any small or sharp objects, 
paper or tea towels in it. These may be sucked 
in and damage the fan or impair the cooling.

There must be a clearance of at least 2 cm 
between the contents of the drawer and the fan 
entry point.

Summary of Contents for CV282110





















































Reviews: