background image

21

Daily maintenance and cleaning

Daily maintenance

Every time the appliance is switched on or switched to 

0

, it rinses automatically. Exception: the appliance was 

only switched off a few minutes beforehand or no coffee 
was dispensed before it was switched to 

0

.

m

Risk of electric shock!

Before cleaning the appliance, switch it off using the 
main switch. Do not use a steam cleaner.

Caution!

Surface damage! 

Do not use any cleaning agents containing alcohol 
or spirits.

Do not use concentrated acetic acid or citric acid-
based cleaning agents or essences.

Do not use abrasive cloths or cleaning agents.

Always remove any residues of limescale, coffee, 
milk and descaling solution immediately. Such 
residues may cause surfaces to corrode.

New sponge cloths may contain salts. Salts can 
cause rust film on stainless steel and must 
therefore always be washed out thoroughly before 
use.

Notes

The drip tray and coffee dregs container should be 
emptied and cleaned every day in order to prevent 
deposits. 

If the appliance has not been used for a prolonged 
period of time (e.g. while you are on holiday), clean 
the entire appliance thoroughly, including the milk 
system and brewing unit.

1

Wipe the housing with a soft, damp cloth. 

2

Rinse out the water tank with clear, fresh water.

3

Remove the shelf and pull out the drip tray. 

4

Empty the drip tray and coffee dregs container. 

5

Clean the drip tray and the coffee dregs container 
or put them in the dishwasher.

6

Clean the shelf with a commercially available 
limescale remover. Allow the limescale remover to 
briefly take effect and then rinse with water. Dry the 
shelf immediately.

Note: 

Do not put the shelf in the dishwasher. 

Immediately remove residues from the shelf to avoid 
stains.

7

Wipe the interior of the appliance where the trays 
rest.

8

Dismantle the milk container.

9

Clean the metal casing by hand. Do not put it in the 
dishwasher. All other components can be cleaned 
in the dishwasher.

10

Refit all of the components.

Cleaning the brewing unit

Notes

Regularly clean the brewing unit by hand in addition 
to the automatic cleaning programme.

Do not use washing-up liquid or other cleaning 
agents to clean the brewing unit and do not put the 
brewing unit in the dishwasher.

1

Turn the function selector to 

0

.

2

Pull out the appliance fully (see section 

Pulling out the 

appliance

).

3

Switch off the appliance using the main switch.

4

Use the door handle to open the brewing unit door 
outwards.

5

Slide the red brewing unit lock all the way to the 
left.

Summary of Contents for CMP 250





























Reviews: