15
Preparing a coffee with milk
m
Risk of burns!
The milk system becomes very hot. After use, allow it to
cool down first before touching it.
You can decant the milk into the milk container
supplied, or simply use the milk directly from the milk
carton.
▯
Push the coffee dispenser right to the bottom.
▯
Open the flap on the coffee dispenser.
▯
Feed the milk hose out through the opening on the
right and close the flap again.
▯
Place the filled milk container on the right next to
the coffee dispenser and connect the milk hose to
the top of the milk container.
- or -
Place the filled milk carton on the right next to the
coffee dispenser. Insert the milk hose into the milk
carton. The grooved end of the milk hose must be
immersed in the milk.
To prepare a drink:
The appliance must be switched on. The water tank and
bean container must be filled.
1
Rotate function selector to position 2.
2
Select Latte Macchiato, Cappuccino or Caffe Latte
with the rotary selector. In order to select a drink
made from ground coffee, fill the ground coffee
drawer first.
3
Place a cup or glass under the coffee dispenser.
4
Press
I
to start.
- or -
Touch the
C
symbol first, then set the size, strength
and temperature using the rotary selector and
confirm with
™
.
The milk is drawn in and prepared, after which the
coffee is brewed.
Notes
‒
While the beverage is dispensed, the
&
symbol is
displayed. Touch this symbol to stop the beverage
being prepared.
‒
Using the
‡
symbol, you can save the current
beverage: touch the
‡
symbol, turn the function
selector to a free memory location, save the entry
(see section
Individual beverages
).
‒
Dried-on milk residues are difficult to remove, so
always clean the milk system after every use
(see section
Cleaning the milk system
).
Preparing milk froth and warm milk
m
Risk of burns!
The milk system becomes very hot. After use, allow it to
cool down first before touching it.
To prepare a drink:
The appliance must be switched on.
1
Rotate function selector to position 2.
2
Connect milk hose (see section
Preparing coffee with
milk
).
3
Select "Milk froth" or "Warm milk" with the rotary
selector.
4
Place a cup or glass under the coffee dispenser.
5
Touch the
C
symbol.
6
Set the size using the rotary selector.
7
Press
™
to confirm the settings.
8
Press
I
to start.
The milk is drawn in and subsequently flows into the cup
or the glass.
Notes
‒
While the beverage is dispensed, the
&
symbol is
displayed. Touch this symbol to stop the beverage
being prepared.
‒
Using the
‡
symbol, you can save the current
beverage: touch the
‡
symbol, turn the function
selector to a free memory location, save the entry
(see section
Individual beverages
).
‒
Dried-on milk residues are difficult to remove, so
always clean the milk system after every use
(see section
Cleaning the milk system
).
