51
Connecting an extractor hood
en-us
symbols for the hood controls on the cooktop are
displayed on the cooktop control panel.
Connecting via your home network
You require a router that has WPS functionality.
You need to be able to access your router. If you do not
have this, follow the steps for "Direct connection".
First make sure that the extractor hood is on your home
network.
1.
Open the basic settings.
2.
Touch the
t
symbol repeatedly until the
™“
setting
appears.
‹””
lights up on the cooking zone display.
3.
Set the value to
‚
using the twist knob.
‚
will flash on the cooking zone display.
4.
Press the WPS button on the router within the next
two minutes.
The cooktop is connected to the home network and
the
ƒ
value appears in the cooking zone display.
5.
Initiate the process for connecting to the extractor
hood.
Once the hob is connected to the extractor hood, the
‹¯
value appears in the cooking zone display. The symbols
for the hood controls on the cooktop are displayed on the
cooktop control panel.
Note:
Connection can only be established when both
appliances are connected to your home network and the
connection process has been initiated for both of them. If
the connection process has already timed out for one of
the two appliances, try to connect again (basic settings,
™“
setting).
Resetting the connection
You can reset the connections you have saved for your
home network and extractor hood at any time.
1.
Open the basic settings.
2.
Touch the
t
symbol repeatedly until the
™“
setting
appears.
3.
Set the value to
‹””
using the twist knob.
Controlling the hood via the cooktop
In the basic settings of your cooktop, you can adjust the
behavior of your extractor hood depending on the switch-
on/off of the cooktop or individual cooking zones.
"Hood control settings" on page 52
You can select other settings using the control panel.
Setting the fan
Switching on
Touch the
}
symbol.
Choosing the fan setting
Turn the twist knob clockwise or anti-clockwise to adjust
the fan setting.
The following settings are possible:
Switching off
To switch the fan off and continue cooking:
1.
Touch the
}
symbol.
2.
Use the twist knob to select the fan setting
‹
.
To switch off the cooktop:
How the fan behaves once the cooktop is switched off
depends on the basic setting you have selected.
If the
¥
symbol is displayed, the fan is in run-on mode.
Note:
Once the cooktop and fan have been switched off,
the
E
symbol may still be faintly visible.
Setting the hood lighting
You can switch the hood light on and off via the cooktop's
control panel.
Touch the
ž
symbol.
Depending on the basic settings you have selected, the
light will automatically be switched on or off when the
cooktop is switched on or off.
Display
Function
‹
Fan off
‘
Automatic mode
The fan starts automatically when steam is
produced
‚
,
ƒ
,
„
Fan settings
Intensity: Low, medium, high
˜
PowerBoost function
»
Intermittent ventilation
¥
Fan run-on
