21
Cleaning the appliance
Clean the appliance after each use once it has cooled
down. Remove liquids that have boiled over immediately
and do not allow any food remains to burn on.
1
Refit the burner parts and pan grids after cleaning
and drying them.
2
Make sure that the burner parts are in the correct
position.
Note:
When you refit the burner ring and burner cap,
they must lock in place and be fitted level.
Burnt-on dirt
For hard-to-remove, burnt-on dirt, you can order a gel
grill cleaner from your specialist retailer or our after-
sales service (item number 00311761). It is suitable for
pan supports and the stainless-steel recess. If
necessary, let the dirt soak overnight. Follow the
instructions on the cleaning agent.
Caution!
Do not use the gel grill cleaner on the burner parts.
Appliance
part/surface
Recommended cleaning
Stainless-steel
surfaces
Apply washing-up liquid with a soft, damp
cloth; dry with a soft cloth.Only use a mini-
mal amount of water when cleaning so that
no water enters the appliance.
Caution!
Damage to the seal: Do not use anything
other than a soft brush to clean the gap
around the edge of the stainless steel sur-
face. Avoid using sharp objects.
You can purchase a stainless-steel cleaning
agent from your specialist retailer or from
our after-sales service (order
number 00311499) to remove stubborn dirt
or discolouration caused by heat.
Pan supports
Carefully remove them for cleaning. Soak in
the sink. Clean using a scrubbing brush and
detergent.
Clean the area around the rubber buffers
carefully so that they do not become
detached.
Rinse with clean water and dry thoroughly
before refitting.
Do not clean them in the dishwasher.
Control knob
Clean using a soft, damp cloth and a little
washing-up liquid; the cloth must not be too
wet.
Caution!
Damage to the appliance: Do not detach
the control knob to clean it.
Burner parts
Rinse with clean water and dry thoroughly
before refitting.
Do not clean them in the dishwasher.
Ignition plug
If necessary, use a small brush to clean it.
