20
en
Time-setting options
3
Set the required cooking time using the rotary
selector.
4
Press
I
to start.
The appliance starts. The Timer menu closes. The
display shows the temperature, operating mode,
remaining cooking time and cooking time end.
One minute before the end of the cooking time, the
elapsed cooking time is shown enlarged on the display.
Once the cooking time has elapsed, the appliance
switches off. The
6
symbol flashes and an audible
signal sounds. The signal stops early if you touch the
™
symbol, open the appliance door, or set the function
selector to
0
.
Changing the cooking time:
Call up the Timer menu. Use
C
to select the
6
"Cooking time" function. Use the rotary selector to
change the cooking time. Press
I
to start.
To cancel the cooking time:
Call up the Timer menu. Use
C
to select the
6
"Cooking time" function. Cancel the cooking time
with
Ž
. Press
'
to return to normal operation.
To cancel the entire procedure:
Set the function selector to
0
.
Note:
You can also change the type of heating and
temperature while the cooking time elapses.
End of cooking time
You can delay the cooking time end to a later time.
Example: it is 14:00. The dish requires a cooking time of
40
minutes. You want it to be ready at 15:30.
Enter the cooking time and delay the cooking time end
until 15:30. The electronics system calculates the start
time. The appliance starts automatically at 14:50
and
switches off at 15:30.
Bear in mind that food which spoils easily should not be
left in the cooking compartment for too long.
Delaying the cooking time end
You have set the type of heating, temperature and
cooking time.
1
Touch the
M
symbol.
2
Use
C
to select the
5
"Cooking time end" function.
3
Set the required cooking time end using the rotary
selector.
4
Press
I
to start.
The appliance switches to standby. The display shows
the operating mode, temperature, cooking time and
cooking time end. The appliance starts at the calculated
time and automatically switches off once the cooking
time has elapsed.
Note:
If the
6
symbol flashes, you have not set a
cooking time. Always begin by setting a cooking time.
Once the cooking time has elapsed, the appliance
switches off. The
5
symbol flashes and an audible
signal sounds. The signal stops early if you touch the
™
symbol, open the appliance door or set the function
selector to
0
.
Changing the cooking time end:
Call up the Timer menu. Use
C
to select the
5
"Cooking time end" function. Set the required cooking
time end using the rotary selector. Press
I
to start.
&RRNLQJWLPH
&RRNLQJWLPHHQG
