en
Home Connect
22
14 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents supplied by
Home Connect.
¡
Please also follow the instructions in the Home Con-
nect app.
Notes
¡
Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→
¡
If you want to operate the appliance via the
Home Connect app, you must activate the remote
control function in the Home Connect settings first.
This function is for your own safety. Turn the func-
tion selector on the appliance to the light position
to enable the remote control function.
¡
Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡
In networked standby mode, the appliance requires
a maximum of 2 W.
14.1 Setting up Home Connect
Requirements
¡
The appliance is connected to the power supply and
is switched on.
¡
You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡
The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
1.
Download the Home Connect app.
2.
Open the Home Connect app and scan the follow-
ing QR code.
3.
Follow the instructions in the Home Connect app.
14.2 Home Connect settings
You can adjust the Home Connect settings and network settings in your appliance's basic settings.
Which settings the display shows will depend on whether Home Connect has been set up and whether the appliance
is connected to your home network.
Symbol
Basic setting
Possible settings
Explanation
Connection type
LAN
Wi-Fi
You can switch between connection types (LAN cable
and Wi-Fi). Follow the instructions for setting up the rel-
evant connection type.
Connection
Connect
Disconnect
You can switch the network connection on or off as re-
quired. The network information is retained after the ap-
pliance is switched off. After switching on the appliance,
wait for a few seconds until it reconnects to the network.
Note:
In networked standby mode, the appliance re-
quires a maximum of 2 W.
Connect to app
Start the connection process between the app and the
appliance.
Software update
As soon as a new software version is available, a mes-
sage appears on the display. In the Home Connect
menu, you can install the new software using .