Gaggenau BS45.111, User Manual And Installation Instructions, Page: 60 / 64

en
Installation instructions
60
2.
Remove the cover cap.
3. Undo the two screws a little, but do not completely
remove them.
4. Adjust the appliance door using the side screw; to
do this, open the appliance door and then close it
again if necessary.
5.
Check the alignment.
6.
Tighten both screws.
5
7. Fit the cover cap.
8.
Slide the appliance into the built-in recess.
22.9 Combining the appliance with an oven
1.
Only combine suitable appliances of the same
brand and series.
2.
Fit the combi-steam oven first, then the oven.
22.10 Combining the appliance with a
warming drawer
ATTENTION!
Sharp edges on the appliance may damage the panel
of the warming drawer.
▶
Do not damage the warming drawer cover when
sliding the appliance in.
1. Only combine suitable appliances of the same
brand and series.
2. Install the warming drawer first.
3.
Follow the installation instructions for the warming
drawer.
4.
Slide the appliance, on the warming drawer, into the
built-in cabinet.
22.11 Removing the appliance
1.
Disconnect the appliance from the power supply
2.
Undo the fastening screws.
3.
Lift the appliance slightly and pull it out completely.