Gaggenau BS 464 610, Use And Care Manual

Page: 21 / 52

21
Cooking time
If you set a cooking time for your meal, the appliance
switches off heating automatically after this time has
elapsed.
You can set a cooking time from 1 minute to 23:59
hours.
Setting the cooking time
You have set the heating function and temperature and
you have placed your dish in the oven interior.
1 Touch the
M
symbol.
2 With
C
, select the "Cooking time" function
6
.
3 Set the required cooking time with the rotary
selector.
4 Start with
I
.
The appliance starts. The timer menu is closed. The
temperature, the operating mode, the remaining cooking
time and the end of the cooking time appear in the
display
One minute before expiration of the cooking time, the
expiring cooking time is enlarged in the display.
The appliance switches off after expiration of the
cooking time. The
6
pulsates and a signal sounds. It
goes off prematurely if you touch the
™
symbol, open
the appliance door or set the program selection to 0 .
Changing the cooking time:
Launch the timer menu. With
C
, select the "Cooking
time" function
6
. Set the cooking time with the rotary
selector. Start with
I
.
Clearing the cooking time:
Launch the timer menu. With
C
, select the "Cooking
time" function
6
. Clear the cooking time with
Ž
.
Return to normal operation with
'
.
Canceling the entire operation:
Set the program selection to 0 .
Note: You can also change the heating function and
temperature during the cooking time.
End of cooking time
You can defer the end of the cooking time until later.
Example: it is 2 pm. The meal takes 40 minutes to cook.
It should be ready by 3.30 pm.
Enter the cooking time and shift the end of the cooking
time to 3.30 pm. The electronic circuitry calculates the
starting time. The appliance starts automatically at 2:50
pm and switches off at 3.30 pm.
Note that easily perishable foodstuffs must not be left in
the oven for too long.
Shifting the end of the cooking time
You have set the heating function, the temperature and
the cooking time.
1 Touch the
M
symbol.
2 With
C
, select the "End of cooking time"
function
5
.
3 Set the required cooking time end with the rotary
selector.
&RRNLQJWLPH
)
)
&RRNLQJWLPHHQG