Gaggenau BS 464 610, Use And Care Manual

Page: 20 / 52

20
3 Start with
I
.
The Timer menu closes and the timer starts to run. The
symbol for the timer
Š
appears on the display and the
time can be seen counting down.
A signal sounds once the time has elapsed. The audible
signal ceases if you touch the
™
symbol.
You can exit the Timer menu at any time by touching the
'
symbol. This way, the settings are lost.
Suspend timer:
Call up the Timer menu. Select the "Timer" function with
C
, select
Š
, and touch the
H
symbol. To let the timer
run on, touch the
I
symbol.
Switch off the timer early:
Call up the Timer menu. Select the "Timer" function with
C
, select
Š
, and touch the
Ž
symbol.
Stopwatch
The stopwatch runs independently of the other
appliance functions.
The stopwatch counts up from 0 seconds to 90 minutes.
It has a pause function. Therefore, you can stop the
timer in between times.
Starting the stopwatch
1 Launch the timer menu.
2 With
C
, select the "Stopwatch" function
p
.
3 Start with
I
.
The timer menu is closed and the time runs. The
p
symbol and the elapsing timer are shown in the display.
Stopping and restarting the stopwatch
1 Launch the timer menu.
2 With
C
, select the "Stopwatch" function
p
.
3 Touch the
H
symbol.
The time stops. The symbol changes to Start
I
again.
4 Start with
I
.
The time continues to run. Once 90 minutes have been
reached, the display pulsates and a signal sounds. It
goes off when you touch the
™
symbol. The
p
symbol
disappears from the display. The operation has ended.
Switching off the stopwatch:
Launch the timer menu. With
C
, select the "Stopwatch"
function
p
and touch the
Ž
symbol.
6WRSZDWFK
6WRSZDWFK