37
Timer
The timer only runs as long as no other function is set.
You can enter a maximum of 90 minutes.
Setting the timer
1.
Call up the Timer menu.
The "Timer" function
Š
is displayed.
2.
Turn the rotary selector to set the desired time.
3.
Start with
I
.
The Timer menu closes and the timer starts to run. The
symbol for the timer
Š
appears on the display and the
time can be seen counting down.
A signal sounds once the time has elapsed. The audible
signal ceases if you touch the
™
symbol.
You can exit the Timer menu at any time by touching the
'
symbol. This way, the settings are lost.
Suspend timer:
Call up the Timer menu. Select the "Timer" function with
C
, select
Š
, and touch the
H
symbol. To let the timer run
on, touch the
I
symbol.
Switch off the timer early:
Call up the Timer menu. Select the "Timer" function with
C
, select
Š
, and touch the
Ž
symbol.
Stopwatch
The stop watch only runs as long as no other function is
set.
The stop watch counts from 0 seconds up to 90 minutes.
It has a pause function. This allows you to stop the stop
watch from time to time.
Starting the stopwatch
1.
Launch the timer menu.
2.
With
C
, select the "Stopwatch" function
p
.
3.
Start with
I
.
The timer menu is closed and the time runs. The
p
symbol and the elapsing timer are shown in the display.
Stopping and restarting the stopwatch
1.
Launch the timer menu.
2.
With
C
, select the "Stopwatch" function
p
.
3.
Touch the
H
symbol.
The time stops. The symbol changes to Start
I
again.
4.
Start with
I
.
The time continues to run. Once 90 minutes have been
reached, the display pulsates and a signal sounds. It
goes off when you touch the
™
symbol. The
p
symbol
disappears from the display. The operation has ended.
Switching off the stopwatch:
Launch the timer menu. With
C
, select the "Stopwatch"
function
p
and touch the
Ž
symbol.
7LPHU
6WRSZDWFK
6WRSZDWFK