Installation instructions
en
31
Remove the feet.
23.8 Installation in a tall unit
Observe the installation dimensions and the safety
clearances in a tall unit.
Do not fit the appliance too high up; it must be pos-
sible for accessories to be removed easily.
Adjust the feet.
23.9 Installing the appliance
1.
Push the appliance in fully.
Do not kink or trap the connection cable, or route it
over sharp edges.
2.
Align the appliance horizontally and centrally.
3.
Use a spirit level to adjust the appliance so that it is
perfectly level.
4.
Open the appliance door.
5.
Use the screws to screw the appliance tightly onto
the unit, opposite the hinge side.
6.
Pre-drill the holes on the hinge side.
7.
Screw the appliance tightly onto the unit.
8.
Remove any packaging material and adhesive film
from the cooking compartment and the door.
23.10 Removing the appliance
1.
Disconnect the appliance from the power supply.
2.
Undo the fastening screws.
3.
Lift the appliance slightly and pull it out completely.
