Timer functions
en
17
14
Timer functions
Your appliance has different timer functions, with which
you can control its operation.
14.1 Calling up the timer menu
Requirements
¡
The appliance is activated.
¡
The function selector is set to or .
▶
Press .
a
The timer menu is displayed.
Notes
¡
If you turn the function selector to a type of heating
or basic settings while the short-term timer or stop
watch is running, a notification appears on the dis-
play.
Press to confirm the notification and interrupt the
short-term timer or the stop watch. The appliance is
ready to use.
¡
In order to continue the short-term timer or stop
watch, turn the function selector to or .
¡
You can use the short-term timer and the stopwatch
at the same time.
¡
If the function selector is set to , the display only
shows the short-term timer.
¡
If the function selector is set to , the display shows
the short-term timer and the stopwatch.
14.2 Short-term timer
The short-term timer only runs if you have not set any
other function. You can enter a maximum of
90 minutes.
Set the short-term timer
1.
Call up the timer menu.
a
The display shows "Timer" .
2.
Use the rotary selector to set the required cooking
time.
3.
Press to start.
a
The appliance closes the timer menu and the time
counts down.
a
The display shows and the time that has elapsed.
a
A signal tone sounds once the time has elapsed. If
you press , you can end the signal early.
Tip:
Press to exit the timer menu. The settings are
lost.
Stopping the short-term timer
1.
Press .
2.
Use and "Timer" to select and press .
3.
To allow the timer to continue counting down, press
.
Switching off the timer early
1.
Press .
2.
Use and "Timer" to select and press .
14.3 Stopwatch
The stopwatch only runs if you have not set any other
function. The stopwatch counts upwards from
0 seconds up to 90 minutes.
You can use the pause function to pause the stop-
watch occasionally.
Starting the stopwatch
1.
Press .
2.
Use to select "Stopwatch" .
3.
Press to start.
a
The appliance closes the timer menu and the time
counts down.
a
The display shows and the time that has elapsed.
Stopping the stopwatch
1.
Press .
2.
Use to select "Stopwatch" .
3.
Press .
a
The time stops and the symbol switches to start .
4.
Press to start the stopwatch.
a
The time continues to run. Once it has reached
90 minutes, the display pulses and a signal tone
sounds. If you press , you can end the signal.
a
goes out on the display and the procedure is
ended.
Switching off the stopwatch
1.
Press .
2.
Use to select "Stopwatch" .
3.
Press .
15
Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
15.1 Activating the childproof lock
Requirements
¡
The childproof lock is set to "Available" in the basic
settings.
¡
The function selector is set to .
▶
Press and hold for approx. 6 seconds.
a
The standby display appears and the display shows
.
Note:
If there is a power cut after the childproof lock
has been activated, the childproof lock may be deactiv-
ated when the power comes back on.
15.2 Deactivating the childproof lock
Requirement:
The function selector is set to .
▶
Press and hold for approx. 6 seconds.
