![Gaggenau BMP 224 User Manual And Installation Instructions Download Page 30](http://html1.mh-extra.com/html/gaggenau/bmp-224/bmp-224_user-manual-and-installation-instructions_3219897030.webp)
en
Installation instructions
30
¡
Only a licensed professional may connect
appliances without plugs. Damage caused
by incorrect connection is not covered un-
der the warranty.
WARNING ‒ Risk of injury!
Parts that are accessible during installation
may have sharp edges and may lead to cut-
ting injuries.
▶
Wear protective gloves.
WARNING ‒ Risk of fire!
It is dangerous to use an extended power
cord and non-approved adapters.
▶
Do not use extension cables or multiple
socket strips.
23.2 Scope of delivery
After unpacking all parts, check for any damage in
transit and completeness of the delivery.
23.3 Appliance dimensions
You will find the dimensions of the appliance here
23.4 Fitted units
This appliance is only intended to be fully fitted in a kit-
chen. It is not intended to be used as a tabletop appli-
ance or within a cupboard.
Ensure that the fitted cabinet behind the appliance
does not have a back panel.
The minimum installation height is 850 mm.
Do not cover the ventilation slots and air intake open-
ings.
For appliances with additional plug adapters, the min-
imum installation depth is 340 mm.
23.5 Electrical connection
In order to safely connect the appliance to the elec-
trical system, follow these instructions.
¡
The appliance is supplied with a fitted plug and may
be connected to a correctly installed earthed socket
only.
¡
A socket must only be installed by a qualified elec-
trician, and in accordance with the appropriate regu-
lations.
¡
The fuse protection must be rated at 10 A (L or B
circuit breakers). The mains voltage must corres-
pond to the voltage specified on the rating plate.
¡
The appliance must only be connected using the
power cable provided.
¡
The power cable must be plugged in at the rear of
the appliance.
¡
Connecting cables with various plug types are avail-
able from customer service.
¡
If the plug is no longer accessible following installa-
tion, an all-pole isolating switch with a contact dis-
tance of at least 3 mm must be present.
23.6 Appliance combinations
When combining with other appliances, note the follow-
ing.
Do not install the appliance above a steamer, a combi-
steam oven or a dishwasher.
23.7 Installation in an upper cabinet
Observe the installation dimensions and the safety
clearances in a tall unit.
Do not fit the appliance too high up; it must be pos-
sible for accessories to be removed easily.