7
REV. 7/14
S/N: 1070 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
OVERHAUL
The disassembly and re-assembly procedure can be accomplished by utilizing the following instructions and drawings. Use extreme
care during disassembly and re-assembly not to mar or nick any smooth surface that comes in contact with seals. Before installing
seals, always apply a good lubricant, such as Lubriplate®, to the surfaces. It is recommended that tool kit (GB740TK) be used to
facilitate overhaul. A complete overhaul can be achieved by the use of Service Kit 743015 which contains a complete set of o'rings,
back-up rings, screws, washers and gasket.
See hydraulic thread preparation (page 4) for reassembly of hydraulic hose (
A
-
336).
WARNING
DEPRESS LEVER ASS’Y AND DISCONNECT FROM AIR WITH PISTON IN THE REAR POSITION BEFORE OVERHAUL. SEVERE
PERSONAL INJURY MAY OCCUR IF AIR HOSE IS NOT DISCONNECTED.
USE
CAUTION
WHEN FORCING PISTON ROD ASSEMBLY
DOWNWARD WITH HEAD CYLINDER ASSEMBLY REMOVED, HYDRAULIC OIL WILL EJECT FORCIBLY FROM HANDLE.
(704214 CATCHER BAG SHOWN ABOVE IS SOLD SEPARATELY)
Part No.
Description
704149
Piston Rod Wrench
704150
Packing Plug Wrench
704151
Power Cylinder Tool
704152
Seal Guide
704153
Air Bleeder Ass'y
S1178
Valve Extractor
744251
Valve Spring Installation Tool
744152
Valve Sleeve Removal Tool
GB740TK Service Tool Kit Includes:
704214 STEM CATCHER BAG
704149
PISTON ROD WRENCH
704151
POWER CYLINDER TOOL
704152
SEAL GUIDE
704150
PACKING PLUG WRENCH
704153
BLEEDER BOTTLE
744251
VALVE SPRING
INSTALLATION TOOL
744152
VALVE SLEEVE
REMOVAL TOOL
S1178
VALVE EXTRACTOR
